Tag: Repair and Parts

Now in various fields of production technologies are applied, using infrared – beams. One of the lines used by car services – drying paint and preparatory materials. In the infrared – heat drying begins with surface of the product due to penetrating properties of infrared – beams. This in turn prevents the exit of the solvent from the inner layers, which will positively affect the drying time and quality of coverage. Solvent in the surface layer increases its concentration, while improving the spreading of paint on the surface of the coated product and as a consequence – to improve the quality of the coating.

Infrared heating equipment does not require additional space as well as can not apply Spray drying kilns for painting parts of the car (hood, fender, door). A distinctive feature of the IR-drying is a high performance and high quality of drying. Use IR-drying allows you to:-Reduce by 2 times cost of electricity for the drying process. -Reduce to 4 times during the process of drying. -Improve the quality of paint.

In the Russian market of IR dryers are present as domestic and foreign producers, one of these is TROMMELBERG (Germany) Mobile Infrared shortwave with three cartridges for high-performance coatings and drying training materials in the automotive industry. Features: Suitable for drying two-component and single-component materials, as well as for water-borne paints and grounds Each of the cassettes positioned individually, turning to 90 degrees. The cassette assembly can be rotated in 360 degrees. As well as raised and lowered to the desired height. The migration process is controlled by the height gas shock absorber Ultrasonic sensor allows the position of the item at the right distance from the radiator, which prevents overheating or insufficient drying of the surface. With over a short distance heaters will turn off automatically Digital display: an accurate representation of the drying time and distance indicator to the dried surface High efficiency Faster curing radiation through penetration of infrared radiation into the inner layers of material Full-drying for 15 minutes – for 2K acrylic paints, and within 5 minutes – for polyester putty Uniform heating of the dried surfaces Long life Infrared emitters – over 6,000 hours! New ergonomic control panel with 4 memories for programming of drying and drying by installing timers psevdosensorov. Manufacturer: TROMMELBERG Effectively You can use the equipment for drying putty and ground, finishing coatings, enamels, and for these operations is required from 5x to 15ti minutes. At the same time energy costs are reduced by about a factor of 2.5. IR – dryer is widely used car services, service stations and repair shops of various organizations. A distinctive feature of this equipment is a different number of tapes (from 1 to 6 pcs.) dried surface ranged from 0.6 x 0.4 m to 1.0 x 1.5 m.

These resins are used in the automotive industry. Nitrocellulose resins are wastes with incomplete development of the cellulose ester by treatment with nitric acid. Drying resins by by evaporation of the solvent. In pure form, such resins have limiting characteristics. Often, they added plasticizers, depending on the nature and content of which is provided immediately after application shine or paint after polishing.

Nitrocellulose resins are less resistant to weathering and to chemicals than acrylics. They dry quickly and originally used for painting the body vehicles. Epoxy resins are polymers derived from petrochemical by-products. To harden them added catalysts. Educate yourself with thoughts from San Antonio Spurs. When air drying epoxy polyamides are formed, with Hot – epoxy phenolics. Poliuretapovye resins are products obtained in petroleum refining and coal. They are the result of chemical interaction of compounds with free hydroxyl izosianatom. Polyurethane paints are one-and two-component.

Paints have exceptional resistance to weathering, hydrocarbon-to-action, etc. They are used in a wide range: from painting cargo tanks truck, etc. before painting and varnishing wood and metal exposed to the harsh climatic conditions. Drying occurs as a result of chemical reaction (polymerization). Polyvinyl materials the addition of anti-corrosive pigments are the basis for the protective paint and soil. Drying paint mononuclear carried out by evaporation of the solvent, and dvuhsostav-GOVERNMENTAL – due to polymerization. Pigments Pigments or dyes – a powder, which gives the paint color. Their main properties and characteristics: opacity, which depends on the refractive index of light, the volume concentration and particle size of the dye; -Coloring ability (organic dyes are more coloring ability than mineral pigments), particle size and distribution, particle shape, (spherical, nodular, lamellar).

Hundreds of thousands of vehicles from the Russian and foreign manufacturers every day countless furrowed trunk vast expanses of the former Soviet Union. Catch phrase from classical literature, "The car – not a luxury but a way movement "- not quite correct, as to the" iron horse "has always been a reliable means of transportation for many years, it requires careful maintenance. But it was the daily cleaning, the seasonal change of tires at the right time replacing windshield wipers and inspection stations in THOSE SERVICES. And also at the right time to replace worn parts with new ones. In fact, auto battery only requires a daily check the level of electrolyte.

If the level is low – it shows the over-charging, most likely caused by difektom generator. But if the lack of the electrolyte is observed only in one of the elements – this means that the battery Automobile survive their last few weeks. In warm weather it will still somehow but the first few frosts destroy it. Topping the car battery, it is imperative not to forget the one significant feature. The electrolyte level during charging slightly increases on the need to add something, taking this effect into account. What can make acid, once on body parts or the battery case, each perfectly known. Observant motorists occasionally (once every three months) check the batteries – the voltage at the terminals, as in not running and the engine is running. The same care should be taken so that the system electrical machines was not lost.

The filter housing is usually placed underneath the vehicle, and the filter housing must be resistant to salt corrosion. Filters Diesel Systems Diesel fuel injection pump and is sucked through the swinging fine filter to the pump, high pressure regulator. At the bottom of the fuel pump is the primary filter for the detention of large dirt particles sizes. The filter element is located in a transparent casing, which also performs the function and dehumidified. Since the weight of water is greater than the weight of diesel fuel, then it is going and is visible at the bottom of a transparent body. Water must be disposed of in accordance with the instructions.

Finer filtration inherent 'Duplex' (double) filter, which has two filter elements, one for the detention of large particles, and another – for particles less than 2 microns – a thin filtration. Filter for diesel fuel is usually placed at the highest point in order to hold the air bubbles that prevent supply of diesel fuel into the system. To prevent this, you need to unscrew bolt at the top of the filter and let the air gathered. In some versions of fuel system is the automatic determination of the presence of water in the fuel; in achieving an acceptable level of water in the filter on dashboard warning light starts flashing. To reduce the possibility of condensation of water in the tank, we recommend completely fill the fuel tank at the end of the day or week, and the airspace above the fuel is minimal. The less air in the fuel tank, the less condensation may form. In the winter fuel suppliers offer a 'winter' diesel. A certain amount of fuel added to diesel fuel to reduce the possibility of the formation of paraffins (wax precipitation in the form of flakes).

The crystallization of paraffins at a temperature below-20oS or even higher, with chilly winds 20oS. The design of some filters heated components are installed and a thermostat that allows you to lower the temperature of the formation of paraffins. In the case of the formation of paraffins, it is necessary to replace all filters. Fuel filter element traps particles size from 5 to 10 microns.

The plant "Nevsky Filter" – is a leading domestic manufacturer of automotive filters and filter elements for cars and trucks. The company is part of the Industrial Group "Edelweiss" Russia's only industry holding company for the production of filters and filter elements. Beginning in 1997, the plant produces high-quality fuel, oil, air and cabin air filters to the European dizaynom.V Currently, the "Nevsky Filter" is equipped with the latest technology. The company has a modern high-tech equipment made in Japan, Germany, Italy and Korea. This is one of the most technically military industry enterprises. Filter assembly is carried out on automated production lines with minimal involvement of human resources and compliance with European quality standards. All products are factory specially adapted to Russian conditions of operation. Produced continuously filters are examined in the laboratory, which defines how well the filter material absorbs the contaminants contained in the fuel, oil or air.

The German unit PALAS-2000 allows you to control the quality of the used filter paper. The important fact is the high production company culture. More than 11 000 square meters. workshops covered special polyurethane nepylyaschimisya sexes. The company supplies its products to both primary and secondary automotive market in Russia and CIS countries. Today the plant is an official supplier fuel filter on a conveyor Ulyanovsk Automobile Plant (UAZ). Successfully tested and started to supply the pipeline Ulyanovsk Motor Works (UMP) of oil filters. The Minsk Motor Plant (MMZ) are test fuel and oil filters.

Also in full swing test cabin, fuel and oil filters at the Volga Automobile Plant (VAZ). Production Company "Nevsky Filter" has won multiple times tender for the supply of filters for passenger cars of the Ministry of Defense. The plant "Nevsky Filter" has been certified by QMS requirements of ISO 9001 in 2001. The document certifies that the filters are available, taking into account the regulatory documentation, and the state of production is stable and able to provide the appropriate level of product quality. The presence of such a document suggests that the work of the enterprise is organized accordance with international standards and found to be effective. After receiving the certificate of conformity with international quality standard ISO 9001, using best practices, new technologies and innovative approach to manufacturing products for the automotive industry, the company plans to implement in the future a strict policy of quality control aimed at the full satisfaction of customers.

Today, major manufacturers of automobiles began to make cars, change tires that need only two times per year: winter to summer and vice versa – it is easy to patch a puncture with special shawl or sealant. 99% motorists in that case just change the wheel. As if there were not, but without the jack going. when and what will happen to the wheel, unaware of any motorist. So always have a jack and the "spare tire" is a must. But jack jack – are different. And one turns the wheel assembly in the devil's torments, the other can be useful in an unpredictable situation.

take a look at what are the jacks, which one and how to use them properly. On the principle of actuation of the hoisting mechanism, they are divided into mechanical and hydraulic. Mechanical jacks – they all mans car coming off the conveyor car factories. Which, in turn, divided into parallelogram lever and or folding. Lever is now almost not produced or sold, and sold a great variety of folding. they are used to service the small vehicles, whose gross weight does not more than two tons. A relatively small load is compensated by the simplicity, small size and reliability.

For larger vehicles used hydraulic jacks. They are much stronger, however, and much more influential. Hydraulic jacks are also divided into two types – and telescopic lever or movable. The role of the first lifting mechanism is hydraulic piston mechanism directly, the other hydraulic cylinder pushes for lifting the lever, which in turn raises the car.

The new line consists of three systems – Lockus F1, Lockus F2 and Lockus F3, differing in the way of management and functional richness. Lockus alarm installed on the Ford Focus cars and various configurations can significantly increase possible full-time security equipment. Lockus F1 car alarm is recommended for installation in cars Ford, not equipped with full-time security package. Management system is four-button keyfob with a dynamic coded control signals. Car alarm Lockus F2 is recommended for installation in cars Ford Focus, equipped with the function of remote control central locking system (these machines are equipped with safety package 1, 4, or Number 5). Arming and Disarming is regular remote control car Ford (the system automatically determines when locking and unlocking central locking system, and thus will enable or disable the protection). The most powerful and functionally rich system in the new line is Lockus F3. This system is aimed at car owners the highest requirements for anti-theft equipment.

It is not just car alarm and a burglar and anti-theft complex. In fact, Lockus F3 combines the immobilizer and slave-signaling, and includes the most modern technologies used in the elite anti-theft systems, Black Bug. Lockus F3 is recommended for installation in cars Ford Focus, equipped with remote control function of the central locking. Enabling and disabling alarms are also carried out with the regular remote central locking. High level of protection against theft provides remotely controlled relay HOOK-UP. Number installed in the vehicle anti-theft devices are not restricted. Lockus F3 also provides protection against seizure, and in the critical situation of ownership does not require any action to lock the engine. In addition, Lockus F3 is protected from electronic intrusion of the second generation technology, DID, and the backup L-channel provides confident identification tag, even the presence of noise in the air.

The newest car alarms car full control and provide an electronic lock on the engine. Function provides confirmation disarm, which can insure owner in case of theft or full-time remote key fob Ford signaling (by the owner of the regime can be switched off only after clicking on a secret button and the electronic identification tags, or both). For implementation of additional service functions in the car alarm has two programmable Lockus timer channel that can be included on a pre-programmed events, and with the key fob (or by phone at system is connected Reef GSM). 'Altonika' supplies car alarms to a central warehouse Lockus Ford Motor Company with a programmed set of optimal settings that will suit completely most of the cars. If there need to add or disable any features and modes, the default settings can be quickly changed on the computer. Installation of the required minimum intervention in the wiring of the car, as well as eliminates the need to run additional wires. In the car alarm Lockus use the most modern element base, which has high reliability, operating in extended temperature range and resistant to external influences. Car alarm Lockus fully comply with process standards of Ford.