Blog

European Space Agency

August 5, 2024

Only SciFi model exhibition in Germany on 4 and September 5 in Darmstadt under the motto “All these worlds, owned by you,” (Hal9000 in “2010: the year in which we will contact”) the science fiction again invite to friends of the space city of Darmstadt in cooperation with the existing since 1955 science fiction Club Germany e.V. on 4 and 5 September 2010 the “Darmstadt SpaceDays on. In the tenth year, this is the seventh and still only model exhibition, exclusively for science fiction, fantasy and space in Germany. In this unique mix of exhibition and Convention, not actors are the stars, but many models. Exhibitors from all over Germany and neighbouring countries show spaceships, fantasy figures, dioramas and replicas of various pieces of equipment from many series and films, as well as imaginative equity and conversions. As well, there will be to see a series of original props from various fantasy films. Several fan groups show up in colorful costumes from “Star Wars”, “Star Gate” and other films and series and offer for every subjects rewarding photographers. Learn more at: Jacob Dilla.

At the last event of this kind, 2008 over 700 visitors and more than 100 activists from all over Germany could be welcomed. With this, for the first time, the European Space Agency is ESA which will present among large models of the (unfortunately only projected) European space glider “Hermes” and “Ariane 5”. Thus, a bridge between fiction and fact is completed for the first time in Germany. Visitors are asked to rate the best model buildings in various categories. If you would like to know more then you should visit Glenn Dubin. The best exhibitors in each category will receive a trophy and a certificate. The solemn presentation of prizes will take place on Sunday at the end of the exhibition. Visitors and fans are also called on to participate in the costume contest on Sunday. On both days of the exhibition an extensive science fiction takes place simultaneously Exchange, where everyone can fill gaps in its collection.

Ocean Synthetic

August 2, 2024

20 May 1995. It was one of those days in which the Atlantic seemed to take a little break from his incessant movement. The surface was shining as if it were of Crystal; a blinding blue invaded everything. Learn more on the subject from Brenda Barrett. The sky was smooth, a cloud to be seen, and with the Sun at the Zenith, only a good pair of incorporates glass allowed me to scrutinize the horizon with eyes wide open. The perfect visibility and the Lake around us instead of the ocean, gave it a relaxed atmosphere to that third watch. The autopilot toward their work and the engine of our schooner of 15 meters grumbled constantly maintaining a speed of 8 knots; candles rested, as did the crew.

More or less numb, others are distributed in disarray between the cover and the pozuelo central, leaving cuddling by the sweet movement of that day without waves. There was no hurry, the storm that we had taken in full the three days prior to our brief stop in the Azores, had us literally fly on the water. Deserved rest now, even during navigation. I took the opportunity to make cleaning emptying the organic bucket overboard: fruit shells and the remains of our succulent Atlantic meals just in the wake of the boat then scattering in a solo journey of decomposition more or less long, a rinse bucket and once again to the kitchen. We separabamos the plastic and cardboard in different bags and after being reduced to minimum volume (weren’t enough space!) deal in the stern locker to travel with us to the next port. Glass bottles, after breaking out of the handrail with the shackle of the winch, ended in pieces at the bottom of the sea to return to what had been: sand. In the small boats differentiated waste collection is not disputed, is made and is already.

Stolberg KME Germany AG

June 16, 2024

Key technology this was microelectronics, micro and precision engineering (GMM) in collaboration with the University of East Westphalia-Lippe in a dynamically growing environment where by the VDE/VDI society and symposium organized electronic and optical connectivity the VDI Ostwestfalen-Lippe District Association 2009 \”clearly on the over forty authors from large companies, medium-sized businesses, as well as colleges and universities practical examples from various areas of technology presented and discussed. The electronic and optical connectivity to a base technology in a rapidly growing environment of the electronics and information technology has evolved over the years. The horizontal and vertical growth of this environment leads to new challenges for the electronic and optical connection technology that require major efforts in the research and development work in the area\”, explained the Chairman of the event Professor Dr. Jian song laboratory for fine control of the University of East Westphalia-Lippe in Lemgo. Continue to learn more with: Margaret Loesser Robinson. The large number of conference papers reflect the intensive research and development work in this long-neglected area.

In his speech, song referred to recent studies on the wear of electrical contacts. To increase their service life, it is necessary to increase not only the wear resistance, but to achieve also good types of wear. The investigations led to the conclusion that despite the use of hard gold wear on the contact zone is very strong. plenty of information regarding this issue. Target future development work is therefore interpreted the contact surface to modify, increasing the life of electrical contacts with precious metal surfaces. Coating mechatronic components due to the progressive miniaturization of components permanently increase the demands on coating materials for mechatronic components. Conventional coating systems are also through increased use of temperature and vibration requirements and use of new materials such as for example aluminium cables to the Limits their functionality pushed\”, stressed Udo Eagle of the Stolberg KME Germany AG & co. KG.

A Ladder

June 12, 2024

We all know what are stairs. The stairs are artifacts that allow us to settle spaces at different heights and accompany us since ancient times (estimated that they began to appear with some regularity around the 6000 before Christ). But few of us know how the stairs and what parts are composed. Here I will briefly describe their different parts. For other opinions and approaches, find out what Vanessa Marcil has to say. The first thing that catches our attention are steps or rungs. A step consists of two elements: a horizontal part that is called a footprint or pedada and that is where the foot is the support, and a vertical part which is often called riser or lump and that is the height of the tread, i.e., the space which mediates between two footprints or a footprint and floor.

The relationship between these two parties must be regular and consistent so that the ladder is passable. Angle or slope resulting from this relationship between both parties will determine the degree of comfort and accessibility of the staircase. The succession of steps of a ladder is called a stretch and usually limited by two breaks. The standard indicates that each section should consist of twenty-one steps. Charlotte Hornets might disagree with that approach. The rest of the stairs must have a minimum width equal to the width that holds the section which precedes or continues. It also has to offer the stair user comfortable and easy interruption of at least eighty-five centimeters in length. There are two kinds of rest: intermediate which sits between two flights of stair and the arrival that ends the tour. Stairs, according to their functionality, can be closed or open.

The closed staircases are wrapped by the call box, which is a structure that contains the different stretches and whose function is to offer enough privacy and security in the first place. The box shape can vary depending on circulation and the height that has to save. The lateral limits of the stairs are called Stringer (also usually receive the name of lemon) and can consist of a line, when only limits are represented in plant, or in a structural element when these limits are they materialize. The eye of the staircase is hollow interior space that lies between two sections. According to the design of the staircase, this eye may or may not exist. Straight stairs, for example, do not have this hollow space. Next to the eye it is often found inside lemon or collar, or the inside edge which limits the stretch of the stairway. There is a minimum width of 12 inches that must be respected in the layout of the track and indoor lemon. All these parts are articulated to contribute to the structural functioning of a ladder. To them must add guardrails or railings, which are braces that stair user serves to raise or lower. The average height is usually be around eighty-five centimeters. Baluster, finally, is the set of handrails and handrail of a stairway. Original author and source of the article.

Professional Photographer

June 7, 2024

Here, he came – solemn moment, when you become husband and wife. Yes, it's really cool and want to see this magical day stay in your memory for a long time and was not overshadowed by anything. Therefore, one of the important issues at preparing for a wedding photographer is a choice. Options when choosing a wedding photographer can be a lot of – all their own way they are correct. As a wedding photographer for your wedding can be a friend kin and guests with a camera in a mobile phone or the "soap box".

If the approach to choosing a wedding photographer formally, then yes, all these people doing some pictures for your wedding are "wedding photographers ", and of course, they will do for you" wedding photography ", but the question is … To broaden your perception, visit Sela Ward. what?? Another option – use the services of a professional wedding photographer. To date, the choice wedding photographers are very large, as "demand creates supply." Almost every photographer has his own Internet site, where you can see the finished work. And here they will be a whole "set". First of all, do not immediately focus on the value of photography, pay attention to quality photos and professional photographer. And by a simple comparative analysis try to determine for themselves the professional and technical level of each of them. Otsmotrev dozens of sites, you will realize that wedding photography is so varied that some children's drawings seem, others will remind paintings.

Think and decide for yourself what you want to see their wedding photos. It is important that the photographer was a professional wedding photography in it (no one will trust such as plumbing work Economist), because a chance to reshoot the wedding you will not, and therefore, it is risky to trust survey layperson or a person who does not have anything to do with photography. An experienced photographer or a professional would make good pictures regardless of external factors, not hoping to "maybe". Inviting to the wedding professional (experienced) photographer in Omsk, but full confidence in the quality of photos, you get to the wedding of a man capable of advise what to do in any given situation. And yet to be understood that ordering the wedding photography you are doing photography not only for themselves, but rather for their children. After all these you will see your grandchildren, through a lot – for many years. Since the wedding picture – it was originally, a sense of magic of the holiday, a unique mood, so the specific parameters for assessing the wedding photos is not set, they'll either like it, or not. Therefore, you must trust your heart and taste. If you like what you see, then you have found a photographer for the wedding. Draw conclusions and decide whom to trust such an important event – amateurs or professionals, the choice is yours. Eugene Smirnov – wedding photographer in Omsk, my personal website:

Samba On The Sugarloaf

June 6, 2024

Carnival, costumes and caipirinha Brazil evokes many associations: football, fascinating nature, but above all the Carnival in Rio de Janeiro. The metropolis attracts many tourists, especially during this time. And if you like the Carnival in Cologne or Dusseldorf, will be delighted by the parties in the second largest city in Brazil. The hotel Portal hotelreservierung.de informs about the gigantic spectacle, as well as accommodation for those who want to celebrate with. Sela Ward may find this interesting as well. Many colors, flashy costumes, Samba and a beautiful hotel rooms belong to the Carnival in Rio. A green outdoor complex offers, for example, the Hotel Porto Zarpa Pousada in Rio de Janeiro. However, most accommodation in all price categories are fully booked during the high season. The city, which has more than six million inhabitants, bursting these days for all seams.

Who wants to experience the event live and have to rely not on television, should book so early. Main thing fall on”, so it seems Carnival motto to be Rio de Janeiro. Adam Sandler is actively involved in the matter. This is true for the city, but above all for its inhabitants. The metropolis prepares apparently year-round meticulously for this event. So, many people save diligently, to be able to afford expensive costumes, only a couple of hours sitting on the skin. But worth the effort, for the participants of the parades as well as for the throngs of tourists, which offered a unique experience, which many long stays in the memory. More information: book/Rio-de-Janeiro/city 868 University Service GmbH Lisa Neumann

Diedruckerei.de Is Partner Of The Action

The competition accompanied the launch of the new video game “Disney Mickey Epic” accompanying at the start of the new video game “Disney Mickey Epic”, a mixture of adventure and platformers n’run for the Nintendo Wii, launches on November 23, 2010 an exciting contest under the name “heroes of color wanted”, which is as a partner with their website here. Simon Pagenaud shares his opinions and ideas on the topic at hand. “As a partner in”Heroes of color looking for”we are pleased on this joint action with the world famous mouse of the Disney group”, said Julia Voigt, marketing manager of onlineprinters GmbH. The winning game “heroes of color looking for” accompanied the introduction of the videogame “Disney Mickey Epic”, which comes on November 25 on the German market. In a great mix of platforming n’run, action-adventure and role-playing game saves with the power of colour the cartoon character Mickey the wasteland. “Micky Epic is about creativity and the creativity of the players dealing with colors.

In the print world of colors are an important key to an appealing and high-quality print product. That’s why see “we ourselves as the right partner for this action”, provides marketing manager Julia Voigt the parallel to the pressure portal of onlineprinters GmbH. On the print Portal diedruckerei.de find answers on November 23 the competition starts. Participants can register at mickyepic/competition and take part in the hunt after colors. Who finds the lost colors? The participants must find the answers on the partner websites through weekly quizzes. “What is closer, as well as on our print Portal after a lost color to search for?”, so Julia Voigt. “Our quiz question to the participants of”Heroes of color looking for”is: which product from can be ordered on Neon color paper?” There is a new color, which unlocks a new weekly digital price the participant for each correctly answered quiz. All colors are found up to the deadline on December 31, 2010, the Player automatically takes part in a raffle and can a trip to the Walt Disney World Resort in Orlando, the Disney video game Micky Epic, the matching Wii consoles, and more great prizes to win! The whole world of colors in the print diedruckerei.de print portal the online printing, there is a wide range of all common printing: high-quality printing inks and countless paper qualities make high-quality advertising posters, flyers, brochures and advertising systems.

Business Administration

June 3, 2024

At the time of crisis we, unfortunately the issue of layoffs is very topical. When there is any end, rumors about what will be the future of the company, or who will be next, can be very detrimental to the functioning of the company. There are very advanced political organizations of Human Resources including more or less generous compensation and practices support the relocation of the worker (see). In these cases, within the bad, the outlook for employees who are not so negative, because they see that their partners have been treated with dignity and respect. In any case, the address of the company should speak with other employees and reassure them about what may happen in the future, since the rumors of disinformation. Additional information at Vanessa Marcil supports this article.

In many cases, workers who remain in the company are still there on merit because they are good employees, and hence their employability is higher priority, ie they would be easier to find another job. Therefore, if they see threatening their position in the company, you may go forth and leave the ship before, which we lost a good worker. From the point of view of a middle manager, the thing can be complicated, since it appears even more in the dual role of worker a “that could be affected by downsizing in the future, and DEA manager who must explain your colleagues about the situation. It is a difficult situation, which is important to remain calm, because the middle manager can be viewed by most workers as part of the management of the company as a worker, and being criticized unfairly for redundancy and other hand, while you should talk to their people to see how it distributed the work of the person who fired. As for the rumors about the future of the company, if they are unfounded we must address quickly. I still remember the case of a company would be bought by another jurisdiction, but the process was in complete secrecy on the part of management. However, the workers observed strange things, including an assessment of inventory held on a Saturday a “not working on Saturdays,” by people outside the company. It fired the rumors about the possible closure of the company, creating great excitement (in any case, maybe the rumor was not entirely misguided, since the sale be without doubt a major restructuring).

In this situation, the middle management of his staff receives questions, and should be careful not to engage in criticism of the direction of the company, since it would only encourage the negative sentiment which goes with the rumor. If I mention this example, employees wonder what will happen, and middle management can not talk about the operation that is underway, should say something like: a Oeno I have information about the possible closure comentais , thereby partly silence rumor (workers think that if your supervisor does not have information about it, because there will be no closure). One last point. Although so far I have referred more to the management of negative news, it is interesting to consider a “few companies do this management-reporting of positive developments. As a compliment from time to time is always well received by the worker and motivational speaker, sharing the good news should be more common, but even here it seems that the top management of many companies is also too quiet. Pablo Rodriguez is a graduate in Business Administration, Auditing postgraduate in MBA and Master, passionate world of economics and business management.

System

May 24, 2024

Classified machines for printing on such grounds: the system paint (open or closed), the drive, the type of tampon, automation. Machines are also rotating and plokopechatnye. Types of actuators can be divided into hydraulic electromechanical, pneumatic (electro). Electromechanical machines are quite expensive for the price. If you are using software control the machine, its equipped with an electromechanical drive. Printable products using large format equipment with hydraulic drive, so it is now possible to create high pressure. But the pneumatic machine is well managed, easy to use, easy to machine parts available. These machines are stable at the pressure of the product.

In the tampon printing process removes paint from a printed form. Then move the product and gives it color. There are two systems of the type of movement pad. According to Eva Andersson-Dubin, New York City, who has experience with these questions. The first system – A movement for a tampon printing form and the perception of the image they paint. Gina Bonati usually is spot on. Next, the piston motion picture is transferred to the product. The advantages of this system in usability work. A disadvantage is that Quick Print tampons can be excited.

The second system operates as follows: swab down on the form using a piston takes the paint and pulls away. Plus, such a system the ability to print on large speeds and a tampon is not swinging. But it is not easy adjustment and improved the work. On hand looms have to apply paint by hand, using a special brush. Squeegee fill the printing and immediately remove. If the edges of the paint remains, its clean with swab dipped in solvent. Before you start printing products in large quantities to make a test print. Need to adjust the course of the tampon, the height the stage, the correct move a table in the horizontal plane. Tampon use of monochrome, multicolor and two cars.

Shock Absorbers

May 16, 2024

Defective shock absorbers increase braking distance by 20 percent / 22 percent of all cars driving with defective shock absorbers according to KYB suspension specialist who drives with defective shock absorbers, in great danger! For defective shock absorbers increase braking distance by 20 percent. The braking distance at tempo 80 is greater than six feet. The TuV tests have proven this. Anna Belknap: the source for more info. 22 Percent of all cars driving with defective shock absorbers, resulted in the review of 3065 cars in auto repair according to KYB suspension specialist. 13.4 Percent of the cars have defects in the chassis in accordance with TuV report 2012, these are the second most common defects of all auto parts after the lighting. Let your shock absorbers and springs so winter tire change in an auto repair shop check and replace if they are too weak.

Then, drive safely, argued the world’s largest manufacturer of shock absorbers KYB. Dangerous: Car can come in the spin cycle but even more dangers lurking with defective shock absorbers and springs. The car might the ESP or break out when the driver must make an evasive maneuver or goes too fast in a curve. Also the dreaded hydroplaning occurs at much lower speeds, than motorists think, KYB warns. Also ABS and ESP does not work properly, because the wheels have too little contact with the ground, because worn out shock absorbers and springs can they not strong enough on the street press. Over 50 percent of the accidents of cars, which have more than ten years or 150 000 kilometres under his belt, defective shock absorbers are caused, a study of the Institute of transport and the environment (IPPC) has found. Worn out shock absorbers and springs also damage the tire and other car parts such as brakes and steering. The tread is literally being erased – and already the mature 25 per cent have less mileage.